How to maintaine your aluminium window sill? The complete TSV aluminium window system is a lifelong investment, whether we are talking about new construction projects or retrofit projects. To keep the window sill system and covers always in perfect condition, regular maintenance is required. To restore the characteristic glaze, we recommend cleaning the aluminium window sills and covers, from dust or other deposits that will damage the proper functioning of the system over time. Cleaning cand be made with water and a clean cloth. Window cleaning solutions can also be used without any problems.
To remember! TSV aluminium window sills and covers are resistant to gypsum, lime chloride and cement from new construction and / or retrofitting. It is NOT permitted to clean them with nitrocellulose varnishes, varnish thinners and solvents (acetone, ethyl acetate, benzene, chlorinated hydrocarbons, dibutylphthalate, toluene, xylene, methanol, dichloromethane, phenols, alcohol, tetrahydrofuran, softening additives).
TSV recommends a professional installation, which means respecting the following simple procedures when installing the aluminium exterior window system, as follows: x The angle inclination of the window sills should not be less than 5⁰;
x The distance of the edge of the aluminium window sills from the finished facade should be approximately 30 – 40 mm;
x The sealing of the window systems involves the proper fixing of the solbanc profile, using the median gasket behind the window sill and the stainless steel screws and the corresponding masking caps;
x Consideration will be given to the adoption of an anti-noise measures, which involves the application of a soundproof tape on the lower surface of the aluminium window sill – recommended to apply on at least 50% of the surface;
x When installing aluminium window sills with lengths larger than 3000 mm, it is recommended to use a connecting piece (coupling) at 180⁰, which helps to compensate for the expansion of the window sill system due to thermal changes.
